Kyocera ECOSYS MA6000ifx Operation Manual page 384

Setup and Registration (System Menu) > System Menu
Item
Auto Cassette Change
Message Banner Print
Wide A4
Resolution
KIR
Printing Job Terminator
Remote Printing
Direct Printing from Web
Select the following actions when the paper runs out in the paper source while printing.
Value: Off, On
NOTE
• When selecting [Off], the machine displays "Add the following paper in cassette #." (#
is a cassette number) or "Add the following paper in the multipurpose tray.", and
stops printing.
• Load the paper according to the paper source displayed to resume printing.
• To print from the other paper cassette, select [Paper Selection]. Select the desired
paper source.
• When selecting [On], the machine continues printing automatically when the other
cassette contains the same paper as the currently-used cassette.
Set whether the confirmation screen appears before each sheet is printed when printing
multiple banner sheets.
Value: Off, On
Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10
pitch). This setting is only effective in PCL6 emulation.
Value: Off, On
Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the operation panel
settings.
Select the default KIR (smoothing) setting.
Value: Off, On
You can select the condition which regarded as a job termination if the print job could not
be processed until the end due to your environment and the other reason.
Value:
EOJ (End of Job): The command recognized as a termination of the job data is regarded
as one job until it is detected.
End of Network Session: The data included in a network session at network connection
is regarded as one job.
UEL (Universal Exit Language): The UEL included in the termination of the job data is
regarded as one job until it is detected.
Select whether to prohibit printing that is performed without operating the machine.
When [Prohibit] is selected, a document that has been stored in the document box from
the printer driver can be printed from the machine. This prevents another person from
seeing that document.
Value: Prohibit, Permit
NOTE
If [Prohibit] is selected, printing and storing using Quick Copy and Proof and Hold
functions are disabled. Printing a received FAX (optional) is not prohibited.
Set whether to allow Direct Printing from Command Center RX.
Value: Not Allowed, Allowed
Command Center RX User Guide
8-35
Description