User Modes - Oce TDS300 User Manual

User modes

The following user modes are available:
Anonymous user mode
■
Repro operator mode
■
Key operator mode
■
System administrator mode
■
Service operator mode.
■
The anonymous user mode only offers monitoring capabilities. You are not
allowed to change anything.
The repro operator, the key operator and the system administrator modes allow
you to perform a number of user actions.
In the Settings Editor the user modes offer different rights. In repro operator
mode, the operator is allowed to only view settings in the key operator and
system administrator views.
In key operator mode, the operator is allowed to view and change settings in
the key operator view. The key operator is also allowed to view system
administration settings, but is not able to change them.
In system administrator mode, the operator is allowed to view and change
settings in the system administrator view. The system administrator is also
allowed to view key operator settings, but is not able to change them.
The service operator mode is meant for the Océ technician.
When you are not authorized to perform a certain action, the action is grayed
out.
Only one Key Operator or System Administrator at a time is authorized to
make modifications. However, there may be multiple users viewing the
settings. When a second user tries to log on as Key Operator or as System
Administrator, an error message is displayed.
The status bar at the bottom displays the active user mode.
Note:
Océ Power Logic®: The Settings Editor 79