Menu Structure; Media Type And Size On The Printer - Oce TDS300 User Manual

Menu structure

On the Océ TDS300 printer operator panel, you can do a number of actions.
These actions include:
Media settings (material and size).
■
Print info (configuration report, menu card and demo print).
■
Configuration (connectivity issues).
■
System (clear set memory and diagnostic mode).
■

Media type and size on the printer

One of the features of the Océ TDS300 printer are the 2 rolls with the
automatic media change function. This function allows the printer to take
another roll of the same format and copy material when the roll becomes empty
when you print. You must configure this setting in the Océ Settings Editor (see
'Printer supplies and maintenance' on page 87).
If you activate this function the machine automatically switches to the other
roll, if the used one becomes empty. The switch only occurs if the kind of
media and the width of the material is the same for both rolls.
The Océ TDS300 Printer can not identify the copy material type and
Note:
format. Fill the media and indicate the type and the size as described in
chapter , 'Media' on page 88.
See 'List of available material types and sizes' on page 109 for a summary of
all materials for the use with the Océ TDS300 Printer.
If you insert a new roll with another material or with a different width, you
have to program the new roll specifications. Refer to 'List of available material
types and sizes' on page 109.
The machines switches automatically to the other roll if the used roll
Note:
becomes empty, if you activate this function in the Océ Settings Editor.
Use the Océ TDS300 to print 23