Status Messages - Oce TDS300 User Manual

Status messages

Status Messages
Status messages Explanation
Off-line
Reset printer
Connecting.....
Printer asleep
Please wait
Printer ready
Preparing job
Printing
Load roll 1
A2
Paper
Load roll 2
A2
Paper
Manual feed
A2
Paper
Open left cover
Refill toner
Press <on-line>
Conditioning
Printer ready
Roll 1 empty
Printer ready
Roll 2 empty
Printer running
Roll 1 empty
Printer running
Roll 2 empty
Job canceled
Close roll unit
Use the Océ TDS300 to print
The printer is off-line.
Change options.
Turn the printer off and turn the printer on.
There is no communication between the controller and the print-
er.
Wait until there is communication.
The printer is in low power mode.
The energy is saved.
The printer down loads the language.
Wait until the printer is prepared to operate.
The printer is prepared to print.
The printer prepares a print or copy job.
The printer prints.
The printer detects that the required media is not available on roll
1.
Fill roll 1 with the indicated media.
The printer detects that the required media is not available on roll
2.
Fill roll 2 with the indicated media.
The printer detects that the required media is not available in the
manual feed.
Put the required media in the manual feed.
The toner container is empty.
Refill the toner container.
The machine improves the print quality by optimizing the
toner concentration.
Wait until the toner concentration is at the correct level.
The paper roll 1 is empty.
Reload roll 1.
The paper roll 2 is empty.
Reload roll 2.
The paper roll 1 is empty.
Reload roll 1 after the printers stops printing.
The paper roll 2 is empty.
Reload roll 2 after the printers stops printing.
The current print or copy job is canceled
The roll unit is open.
Close the roll unit.
33