Installation procedure for MS Windows
systems
Before you install Océ Remote Logic
minimum system requirements for the remote system. The system must be a
Pentium
3), Windows
more possible systems.
You will find the Océ Remote Logic
CD-ROM and on the Océ Power Logic
the system. The installation procedure for Remote Logic
self-explanatory. When you select the 'Install remote applications' option on
the CD-ROM, a Wizard starts to guide you through the installation process.
When the installation process is complete you do not have to restart your
system.
Océ Remote Logic
Note:
Refer to your system administrator for assistance with the installation
procedure for TCP/IP.
▼
Install Océ Remote Logic
Insert the Océ Remote Logic
1
CD-ROM into the CD-ROM drive of your PC.
Select the 'Install remote applications' option.
2
The installation Wizard starts, and asks to select a setup language.
[13] Choosing a setup language
Install and start Océ Remote Logic® on a workstation
®
233 with 32 Mb RAM running Windows 95, 98, NT
®
2000, or Windows
®
only works when TCP/IP is enabled on your system.
®
®
, you must take note of the following
®
XP. Contact your local Océ organization for
®
application on the Océ TDS300
®
Controller CD-ROM provided with
®
CD-ROM or the Océ Power Logic
®
®
(service pack
®
is quite simple and
®
Controller
59