Oce TDS300 User Manual page 74

These settings can only be saved in Key Operator or System
Note:
Administrator mode.
Apply
become effective. Initially, this button is disabled. It is enabled after the first
setting is changed and disabled again after the apply action is performed or
after an undo action.
Undo
settings were applied (and not back to the factory default). Initially, the 'Undo'
button is disabled. This button is enabled the moment the first setting is
changed. It is disabled after an Apply action is performed or after an undo
action
▼
Save settings to file
Open the 'File' menu and select 'Save as', or press the 'Save as' button on the
1
toolbar.
A dialog box is displayed and the user can supply a directory and a file name.
All settings in the current view mode are saved; not only the ones that
Note:
are currently visible.
A few special files are available here:
Default.kos/Default.sas
■
These files contain the factory default settings for the Key Operator and
System Administrator, respectively, and cannot be changed.
Backup.kos/Backup.sas
■
These files contain a previous version of the settings for the Key Operator
and System Administrator, respectively (before the last Apply).
Current.kos/Current.sas
■
These files contain the version of the settings for the Key Operator and
System Administrator after the last Apply.
When an Apply is performed, first the contents of the current settings is copied
to the backup file. There are two versions of this file, one for KO settings and
one for SA settings. These files are always stored on the system.
▼
Open a saved file
Open the 'File' menu and select 'Open', or press the 'Open' button on the
1
toolbar.
A dialog box is displayed from where you can choose the correct file.
Click the 'Apply' button.
2
The loaded settings are transferred to the system.
74 Océ TDS300 User Manual
When you click on the 'Apply' button, the changes you have made
This button restores the settings to the state it was in the last time the