Keys - Oce TDS300 User Manual

[5] Menu level indicator in the top level of the menu

Keys

With the keys on the operator panel you can make the settings for the Océ
TDS300 Printer.
The following keys are available
Available keys
Key types
On-line key
Next/select key
Previous key
Browse keys
Stop key
Use the Océ TDS300 to print
Function
Press the On-line key to put the printer on-line or off-line. To
activate the program mode and to enter the top level menu. You
can use the Next/select key, the Previous key and the Browse
key to go through the menu. If the green light above the On-line
key is on, the printer is on-line; if this light is off, the printer is
off-line.
To select an option or a setting in the menu. Or in case a sub-
menu is present, enter a menu on a lower level.
Press this key to go one level higher in the menu.
These two keys are used to select another mode at the same lev-
el of the menu, or to display the next or previous option from
the option list.
The red Stop key is used to stop the current print job.
21