Paper Series; Clear Set Memory; Diagnostic Mode - Oce TDS300 User Manual

Paper series

You must enter the paper series that you use in the printer. Choose between:
DIN
■
DIN CARTO
■
Only 8.5 inch
■
Mix 8.5/9 inch
■
▼
To set a paper series
Press the On-line key to put the printer off-line.
1
Select the 'Configuration' item with the
2
Press Next/select to enter the 'Configuration' menu.
3
Select 'Paper series' with the
4
Press Next/select to enter the 'Paper series' menu.
5
Select the required paper series with the
6
Press Next/select to confirm.
7
Press On-line to put the printer on-line again.
8

Clear set memory

The set memory indicates the available memory. If an error occurs, for example
the set memory reaches its limits, you must clear the set memory.
▼
Clear set memory
Press the On-line key to put the printer off-line.
1
Select the 'System
2
Press Next/select to enter the 'System' menu.
3
Enter the password to get access.
4
Select the 'Clear setmem' item with the
5
Press Next/select to enter the 'Clear setmem' menu.
6
Select 'Yes' or 'No' with the
7
Press Next/select to confirm the setting.
8
Press On-line to put the printer on-line again.
9
Turn 'off' and 'on' the controller.
10

Diagnostic mode

The Diagnostic mode is only meant for the Océ service technician.
32 Océ TDS300 User Manual
or
item with the or
'
or
or key.
key.
or key.
key.
or key.
key.