Turn On And Turn Off The Océ Tds300 Scanner; Start The Copy Process - Oce TDS300 User Manual

You can also do a number of special copy jobs. These special copy jobs
include:
Copy non standard size originals
■
Define the copy size
■
Define image quality: Optimization for lines & text, photo or blueprint mode
■
Background compensation for line/text/photo or blueprint mode
■
Edit function: mirror
■
Turn on and turn off the Océ TDS300 scanner
(see chapter , 'How to turn on and turn off the Océ TDS300' on page 16)

Start the copy process

If you press the Start key, and you do not change any settings, the settings of
the previous copy job are used or the default settings of the machine are used:
number of copies 1
■
use roll 1
■
zoom 100%
■
synchro cut
■
no leading or trailing strip
■
auto exposure on; exposure setting 0.
■
Default settings are used in the following situations:
after turn on
■
after you press 'cancel' twice
■
after the panel time-out expires the system settings return to the default
■
values.
If the Start key is pressed the original will be scanned. The original returns to
the operator if you have enabled the rewind function (see page 48). You can
make settings for the next job.
When the original returns, remove the original. A new original can be fed and
you can program new settings.
Use the Océ TDS300 to copy 43