Start Océ Remote Logic® On Your System; Command Line Parameters - Oce TDS300 User Manual

Start Océ Remote Logic
▼
Start Océ Remote Logic
Select 'Océ Remote Logic' via the 'Start' menu.
1
Select ' Application Launcher'.
2
Select the Océ Settings Editor from the 'Application Launcher'.
3

Command line parameters

In order to start Océ Remote Logic
parameters available.
configfile=<config_file>
server=server
language1=lang
parameter 'country1=country'
country1=country
parameter 'language1=language
language2=lang
parameter 'country2=country'
country2=country
parameter 'language2=language
You must always use a matching combination of 'lang' and 'country'
Note:
(see table on page 65).
64 Océ TDS300 User Manual
®
Sets the configuration file to use.
Sets the specified server as the server to connect to.
Specifies the first language in combination with the
.
Specifies the first language in combination with the
'.
Specifies the second language in combination with the
.
Specifies the second language in combination with the
'.
®
on your system
®
faster, there are 6 command line