Initial Settings Menu; Using The Initial Settings Menu - Onkyo DR-815 Instruction Manual

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and video out-
put settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
/ / /
ENTER
Video Output settings
Setting
TV Screen
(See also "Screen sizes
and disc formats" on
page 73.)
AV Connector Out
68
DVD SETUP
Option
Set if you have a conventional 4:3 TV. Widescreen movies are
4:3 (Letter Box)
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
4:3 (Pan & Scan) shown with the sides cropped so that the image fills the
screen.
16:9 (Wide) Set if you have a widescreen TV.
Ordinary (composite) video output.
Video
Compatible with all TVs.
Almost the same quality as RGB, but can give better results if
S-Video
you're using a long SCART cable.
RGB If your TV is compatible, this gives the best picture quality.
1 Press DVD SETUP and select "Ini-
tial Settings".
2 Use the cursor buttons and
ENTER to select the setting and
option you want to set.
All the settings and options are explained
on the following pages.
Notes:
• In the following table, the default setting is shown in
bold: other settings are shown in italics.
• Check the operating instructions supplied with your
other equipment to see which digital audio formats it's
compatible with.
• Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
What it means