Connecting The Power/Turning On The Dvd Receiver - Onkyo DR-90 Instruction Manual

Connecting the Power/Turning on the DVD Receiver

Before connecting
• Make sure that all the connections from pages 10 to 16 are completed (the connection to the TV is required).
• Turning on the DVD Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers. If
this happens, use a wall outlet on a different circuit.
Thank you for your purchase of Our DVD-Video Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
FIRST SETUP
On-Screen Language
TV Shape
2
Press the POWER switch to
switch on the main power.
The DVD Receiver enters standby mode.
The STANDBY indicator lights up.
Notes
• The buttons on the remote controller don't operate if the POWER
switch is set to OFF.
• To switch off the main power, press the POWER switch again.
3
Press STANDBY/ON on the DVD
Receiver or POWER ON on the
remote controller.
The DVD Receiver turns on. The STANDBY indicator goes off.
The first time you turn on the DVD Receiver, the First Setup screen
appears. With the First Setup screen, select the On-Screen Language
and TV Shape according to the aspect ratio of the TV screen (see
pages 46 and 48).
1 Press / to select "On-Screen Language" then press ENTER.
2 Select a language with
3 Press to select "TV Shape" then press ENTER.
4 Select a picture size with
5 Finally press SETUP.
All your selections are set and the First Setup screen disappears.
Notes
• To turn off the DVD Receiver, press STANDBY/ON on the DVD Receiver, or
POWER STANDBY on the remote controller. The DVD Receiver enters
standby mode. Be sure to set the volume to minimum before turning off the
DVD Receiver.
• You can change the above settings later with "Customizing the Function
Settings" on page 44.
STANDBY indicator
(lights up when in standby mode)
STANDBY/ ON
ENG
4:3LB STANDBY
POWER
ON
PHONES
/ , then press ENTER.
/ then press ENTER.
OPEN/CLOSE DOWN UP PAUSE
VIDEO 1 VIDEO 2
INPUT SELECTOR
OFF
TAPE/MD T V
SPEAKER PRESET / PRESET
DISPLAY SETUP CH LEVEL MODE ADJ ENTER TUNING MEMORY FM MUTE
MODE
1
Connect the power cord
to the wall outlet.
To wall outlet
MASTER VOLUME
STOP PLAY
SURROUND
MODE
Re - EQ
DVD
LATE NIGHT
F M A M
BASS TREBLE
LEVEL SETUP
SENDING/
DVD RECEIVER
LEARNED
POWER
SLEEP
ON STANDBY
TITLE MENU
ENTER
RETURN SETUP
CH SEL
1 2 3
TEST
LEVEL
TONE
4 5 6
7 8 9
SEARCH
+10 0
FR PAUSE FF
DOWN PLAY UP
RANDOM STOP SLOW
REPEAT A-B MEMORY
REMOTE CONTROLLER
TV
DIMMER DISPLAY
SURROUND MODE
INPUT SELECTOR
DVD TV
TAPE
VIDEO 1
VIDEO 2 TUNER
AUDIO SUBTITLE
ANGLE ZOOM
OPEN/
CLEAR
CLOSE
POWER
MUTING
TV/ VCR
CHANNEL
TUNER
PRESET
VOLUME
RC-399M
17 17