Selecting Audio Language/Sound Included On The Disc - Onkyo DR-90 Instruction Manual

Selecting Audio Language/Sound
Included on the Disc
Good morning!
You can select a preferred audio language and sound system.
DVD
Selecting a Playback Audio Setting
You can select a set of preferred audio language and sound
system from those included on the DVD video.
This function enables you to temporarily change the audio
language which has been selected as the automatic setting in
the setting menu (see pages 44 and 47), and select the sound
system if the DVD video is recorded in more than one sound
format.
1
Press AUDIO during playback.
AUDIO
The current audio setting is displayed for
about 3 seconds.
Audio: 1
Audio OUT Select : Bitstream
The abbreviation of the language appears.
Refer to the list of languages on page 57.
Press AUDIO or
setting is displayed on the TV
2
screen.
AUDIO
Each time you press AUDIO or
of language and audio recording system
changes.
e.g.
ENTER
: Cycles backwards
Note
Dolby Digital 5.1 Channel sound may be
displayed as "
To turn off the audio setting display
CLEAR
Press CLEAR.
Bon jour! ¡Buenos días!
Audio language
Sound system
Audio channel
ENG PCM 2CH
See next page.
while the audio
, the set
A u d i o : 1 ENG 6CH
A u d i o : 2 ENG PCM 2CH
A u d i o : 3 FRE 6CH
6CH."
About recording systems
This DVD Receiver uses the Dolby Digital (
and PCM systems and cannot play DVD videos recorded in
any other sound system.
Notes
• Some discs allow you to change audio selections only by using the
disc menu. If this is the case, press MENU and choose the
appropriate language from the selections in the disc menu.
• Some discs may have only one set of audio language and sound
recording system and you cannot make this selection.
• The "Audio Language" setting in the setting menu (see page 47) is
for automatic selection of the audio language among those included
on the DVD video when the DVD is inserted. Therefore, the selection
in this section will not change the setting of "Audio Language" in the
setting menu.
• When you turn on the DVD Receiver or replace a disc, the DVD
Receiver returns to the automatic setting in the setting menu (see
page 47).
VCD
Selecting Sound Channels of VIDEO
CDs
A VIDEO CD may have left and right sound channels and
contain sounds or languages on each channel. You can switch
these two channels to hear a preferred sound or language.
During playback, press AUDIO repeatedly to select the
sound cannel.
L. R
AUDIO
L
R
LEVEL SETUP
SENDING/
DVD RECEIVER TV
LEARNED
POWER
SLEEP
DIMMER DISPLAY
ON STANDBY
MENU
TITLE MENU SURROUND MODE
INPUT SELECTOR
2
ENTER
DVD TV
RETURN SETUP VIDEO 1 TAPE
CH SEL VIDEO 2 TUNER
1 2 3
TEST
1,2 LEVEL
TONE AUDIO SUBTITLE
4 5 6
ANGLE ZOOM
AUDIO
7 8 9
OPEN/
SEARCH CLEAR
CLOSE
+10 0
CLEAR
FR PAUSE FF POWER MUTING
TV/ VCR
CHANNEL
DOWN PLAY UP
TUNER
RANDOM STOP SLOW PRESET
VOLUME
REPEAT A-B MEMORY
RC-399M
REMOTE CONTROLLER
6CH), DTS,
Both the left and right
channels are heard.
The left channel is heard.
The right channel is heard.
39