Connecting Speakers - Onkyo DR-90 Instruction Manual

Connecting Speakers

Before connecting
• Refer also to the instruction manuals of the speakers.
• This DVD Receiver is designed to reproduce optimum sound quality
when speakers with impedances within the ranges specified below are
connected. Please check the following information and choose
speakers with appropriate impedances for the connections.
Front speakers: 6 ohms min. per speaker
Center speaker: 6 ohms min.
Surround Speakers : 6 ohms min. per speaker
3
• Strip / in. (10 mm) from the end of each cord, then twist the exposed
8
wires tightly.
3
/ in.
8
Center speaker
– +
Right ch.
12 12
Front speakers
Right ch.
– +
ANTENNA
FM AM
75
CENTER SURROUND
FRONT SPEAKERS
SPEAKER SPEAKERS
R L R L
R L R L
– + – +
Left ch.
Surround speakers
• To prevent damage to circuits, never short-circuit
the positive (+) and negative (–) speaker wires.
• Do not connect the speaker cable
to the L and R connectors at the
same time and do not connect
more than one speaker to the same
speaker connectors.
Left ch.
Active subwoofer
– +
S VIDEO COMPONENT VIDEO OUTPUT
CENTER SUBWOOFER MONITOR
Y C
B
OUT
PRE OUT
( REC )
OUT
OUT
VIDEO
1
TAPE / MD
I N I N
( PLAY )
MONITOR
TV I N
OUT
OUT
VIDEO 1
I N
VIDEO 2
I N
R L VIDEO
Press and hold
the lever.
NO!
DIGITAL OUTPUT DIGITAL INPUT
C OPTICAL OPTICAL VIDEO 1 COAXIAL VIDEO 2
R
Do not connect the power cord
at this time.
Release the lever to
Insert the stripped
replace it.
end of the cord.
NO!
NO!
R L R L