Using Your Computer; Stopping A Command Or Program - Epson Endeavor P60 User Manual

Chapter- 3

Using Your Computer

This chapter briefly describes the following operations:

Stopping a command or program

Changing the processor speed
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you entered a DOS command that you want to
stop, try one of the following:
If these methods do not work, you may need to reset the
computer as described below. Do not turn off the computer to
exit a program or stop a command unless you have to, because
the computer erases any data you did not save.
3 - 1
Using Your Computer