Table of Contents
Advertisement
The SIMM sockets are organized in two banks (Bank 0 and
Bank 1) consisting of two sockets each. You must install the
same type of SIMM in a bank. For example, you can install two
4MB SIMMs in Bank 0, but not one 4MB SIMM and one 8MB
SIMM. However, you can install different types of SIMMs in
the two banks; for example, two 4MB SIMMs in Bank 0 and two
8MB SIMMs in Bank 1.
The SIMMs you install must be 32- or 36-bit, 72-pin, 70ns,
tin-plated, fast-page mode, parity/ no parity type. You can
install faster SIMMs, but they will not improve system
performance. The table below lists the 16MB and 32MB SIMMs
approved for use in your system. You can install these SIMMs
or their equivalents.
The table below lists possible combinations of SIMMs you can
install; do not use any configuration other than one of those
listed in the table.
SIMM configurations
Installing and Removing Options
4-11
Advertisement
Table of Contents
Troubleshooting
