Table of Contents
Advertisement
the hard drive if the computer does not automatically sense
the drive when you select
User Type 1 for your first drive.
this type for your second drive, if necessary.
Drive C, D, E F: Timeout
This option allows you to specify the amount of time the
system can take to automatically configure an IDE drive before
printing an error message. Select 0, 5, 15, or 31 seconds. The
default setting is 5 seconds.
Keyboard
If you are not going to use a keyboard with your system, select
Not installed to disable testing of the keyboard by the
power-on self test and avoid keyboard errors. The default
setting is Installed.
Base Memory
Displays the amount of base memory currently selected.
You cannot change this setting; however, you can use the
Base Memory Size optionon the Advanced CMOS Setup
screen to change the size.
Extended Memory
Displays the amount of extended memory. You cannot change
this setting.
2 - 6
Running the Setup Program
-
. Select
AUTO
CONFIG
Advertisement
Table of Contents
Troubleshooting
