Table of Contents
Advertisement
The connector at the product end of the cord must be an
IEC type CEE-22 female connector.
The cord must be less than 14.8 feet (4.5 meters) long.
Caution
Do not attempt to modify or use the supplied AC power
cord if it is not the exact type required.
Installing Optional Devices
Before you install optional devices, such as drives, expansion
boards, and software, be sure to connect a keyboard and a
monitor, turn on your computer, and let it run the power-on
self test. (See "Turning On the System" on page 1-6 before you
turn on the power.)
Once your system has started successfully, you can turn it off
and add the rest of your optional devices.
Note
If you plan to operate your system without a keyboard or a
monitor (for example, as a network server), you must still
connect these devices to test the system and run the Setup
program. You can disconnect them after you perform these
steps.
1-4 Setting Up Your System
Advertisement
Table of Contents
Troubleshooting
