Safety Instructions For All Work; Safety Information For Using Long Drills - Parkside PABS 20-Li G8 Translation Of The Original Instructions

GB
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered
tool outside the temperature
range stated in the operating
instructions. Incorrect charging or
charging outside the permitted tem-
perature range may destroy the battery
and increase the risk of fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Safety instructions for all
work
a) Hold the power tool by the in-
sulated handle surfaces when
performing work where the
insert tool or screws may come
into contact with hidden wiring.
Contact with a live wire can also cause
a charge in metal parts of the tool and
result in an electric shock.
b) Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock or fire.
24
Safety information for using
long drills
a) Do not work at a speed higher
than the maximum permissible
speed for the drill.Higher speeds
can cause the drill to bend slightly
when rotating freely without contact
with the workpiece and can also cause
injury.
b) Always begin drilling at a low
speed and when the drill is in
contact with the workpiece.Hig-
her speeds can cause the drill to bend
slightly when rotating freely without
contact with the workpiece and can
also cause injury.
c) Do not apply excessive pressure
to the drill. Only apply pressure
lengthwise along the drill. Drills
can bend and break or cause a loss in
control, thus resulting in injuries.
RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk