General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PBSPA 12 D4 Translation Of The Original Instructions

OUTPUT
Rated voltage
Rated current
Charging time
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Vibration emission value
Total vibration values (vector sum of three directions)
determined in accordance with EN 62841:
Drilling in metal
Vibration emission value
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used and, in particular, the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
PBSPA 12 D4
12 V (DC)
2400 mA
approx. 60 minutes
II / (double insulation)
L = 78.3 dB (A)
PA
K = 5 dB
PA
L = 89.3 dB (A)
WA
K = 5 dB
WA
a = 5.306 m/s
h,D
K = 1.5 m/s
WARNING!
► Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
2
Save all warnings and instructions for future
2
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
GB │ IE
│
3 ■