General Safety Directions - Parkside PABS 20-Li G8 Translation Of The Original Instructions

Caution!
Read the operating instruc-
tions before charging.
The charger is for indoor use
only.
T3.15A
Miniature fuse
130°C
Protection class II
(Double insulation)
Electrical appliances must
not be disposed of with the
domestic waste.
LED display while
charging.

General Safety Directions

Caution! The following basic
safety precautions must be
observed while using electrical de-
vices to protect against electric
shock, injury and risk of fire:
Careful handling and use of battery
devices
• To recharge batteries of the
X 20 V TEAM series, only use
a charger belonging to the
X 20 V TEAM series. If a charger
that has been designed for a par-
ticular type of battery is used to
charge other batteries, there is a
risk of fire.
• In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries
may result in injuries and risk of
fire.
• Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery con-
tacts may cause burns or fire.
• If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes,
seek medical assistance. Leak-
ing battery fluid may cause skin
irritations or burns.
• Do not use damaged or altered
batteries. Damaged or altered bat-
teries can be unpredictable and
lead to fire, explosion or risk of
injury.
• Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures over 130 °C can
cause an explosion.
• Follow all instructions for charg-
ing and never charge the battery
or the battery-powered tool out-
side the temperature range stated
in the operating instructions.
Incorrect charging or charging
outside the permitted temperature
GB
19