Wolf M Series Design Manual page 74

Dual Fuel Ranges
Planning Information
GAS REQUIREMENTS
Installation must conform with all applicable gas codes.
Locate the gas supply within the shaded area shown in the
illustration on the following page.
A gas supply line of 19 mm rigid pipe must be provided
to the range. If local codes permit, a certified, .9 m long,
13 mm or 19 mm ID flexible metal appliance connector is
recommended to connect the units ISO 7/1-14 female inlet
to the gas supply line.
Wolf natural gas ranges will function up to 3124 m in
altitude without adjustment and LP gas ranges will func-
tion up to 2621 m. If the installation exceeds these eleva-
tions, contact an authorized Wolf dealer for a high altitude
conversion kit.
GAS SUPPLY PRESSURE
Natural Gas
LP Gas
74 | English
WC
25 mbar
37 mbar