Table of Contents
Advertisement
3
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
4
If an e-mail address was selected, press the + or , key to select
ISH
, and then press the Select key.
To add an additional e-mail address, select
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select
step 4. To delete an address, select
then continue with step 2 of "Deleting a Specified Destination
Address".
Selecting a Group Destination
A maximum of 20 group destinations can be registered on this machine. (A
maximum of 50 e-mail addresses can be registered with one group.) Follow
the procedure described below to specify e-mail addresses from the regis-
tered group destinations as the recipient of the scan data.
For details on registering e-mail addresses as group destinations,
refer to "Registering Group Destinations" on page 174.
1
With the main screen (Scan mode) or
played, press the AddressBook key three times so that
2
Use the keypad to type in the number (between 1 and 20) for the group
destination, and then press the Select key.
The information registered for the group destination appears for two sec-
onds.
3
Press the Select key again.
4
Press the + or , key to select
To add an additional e-mail address, select
then specify the destination.
To check the specified e-mail address, select
step 4. To delete an address, select
then continue with step 2 of "Deleting a Specified Destination
Address".
Scanning With the Machine
CHECK/EDIT
Can Use AddressBook
FINISH
, and then press the Select key.
CHECK/EDIT
FIN-
ADD
in step 4, and
CHECK/EDIT
in
in step 4, and
dis-
Group
appears.
ADD
in step 4, and
CHECK/EDIT
in
in step 4, and
163
Advertisement
Table of Contents
