Configuring Group Policy - Epson SureColor SC-P5300 Administrator's Manual

Administrator's Guide
❏ Algorithm Settings
It is recommended that you select Any for all settings or select an item other than Any for each setting. If you
select Any for some of the settings and select an item other than Any for the other settings, the device may not
communicate depending on the other device that you want to authenticate.
Items
IKE Encryption
Authentication
Key Exchange
ESP Encryption
Authentication
AH Authentication
Related Information
"Configuring Default Policy" on page 73
&

Configuring Group Policy

A group policy is one or more rules applied to a user or user group. The printer controls IP packets that match with
configured policies. IP packets are authenticated in the order of a group policy 1 to 10 then a default policy.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic.
2. Click a numbered tab you want to configure.
3. Enter a value for each item.
4. Click Next.
A confirmation message is displayed.
5. Click OK.
The printer is updated.
Related Information
"Accessing Web Config" on page 23
&
"Logging on to the Printer Using Web Config" on page 35
&
"Group Policy Setting Items" on page 78
&
Advanced Security Settings for Enterprise
Settings and Explanation
Select the encryption algorithm for IKE.
The items vary depending on the version of IKE.
Select the authentication algorithm for IKE.
Select the key exchange algorithm for IKE.
The items vary depending on the version of IKE.
Select the encryption algorithm for ESP.
This is available when ESP is selected for Security Protocol.
Select the authentication algorithm for ESP.
This is available when ESP is selected for Security Protocol.
Select the encryption algorithm for AH.
This is available when AH is selected for Security Protocol.
77