Registering Address Destinations (Direct Input) - Epson Aculaser CX28DN Series User Manual

5
Press the + or , key to select the address to be deleted from the favorite
list, and then press the Stop/Reset key.
6
Press the + or , key to select
The selected address is deleted.
7
To delete another address, repeat the procedure from step 5.
8
To finish deleting addresses, press the Back key.
9
Press the + or , key to select

Registering Address Destinations (Direct Input)

E-mail addresses can be registered as address destinations. A maximum of
250 address destinations can be registered.
Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
1
In the main screen (Scan mode), press the + or , key to select
ITY
, and then press the Select key.
2
Press the + or , key to select
the Select key.
3
Press the + or , key to select
4
Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
5
Press the + or , key to select
Select key.
If an LDAP server is not specified, step 5 is skipped.
6
Use the keypad to type in the registration name, and then press the
Select key.
For details on entering/editing text, refer to "Entering Text" on page
283.
A maximum of 20 characters can be entered.
7
Use the keypad to type in the e-mail address, and then press the Select
key.
The settings are registered, and the
appears again.
170
YES
, and then press the Select key.
FINISH
, and then press the Select key.
ADDRESS REGISTER
ADDRESS
, and then press the Select key.
MANUAL SETTING
ADDRESS REGISTER
Scanning With the Machine
UTIL-
, and then press
, and then press the
menu