Table of Contents
Advertisement
6
Press the + or , key to select
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
Changes made with this procedure will not be applied to the original
data (address destination, group destination, etc.).
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2
To delete an e-mail address, press the + or , key to select
EDIT
, and then press the Select key. Then, press the + or , key to
select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3
Press the Stop/Reset key.
4
Press the + or , key to select
The selected address is deleted.
If all specified addresses are deleted, the main screen is dis-
played.
5
To delete another address, repeat the procedure from step 2.
6
To finish deleting addresses, press the Back key.
7
Press the + or , key to select
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as address destina-
tions or as group destinations.
Addresses can also be registered/edited with Web-based EpsonNet
config. For details, refer to the Reference Guide on the software
CD-ROM.
168
FINISH
, and then press the Select key.
YES
, and then press the Select key.
FINISH
, and then press the Select key.
Scanning With the Machine
CHECK/
Advertisement
Table of Contents
