Replacing An Imaging Unit - Epson Aculaser CX28DN Series User Manual

Large workgroup all-in-one
Hide thumbs Also See for Aculaser CX28DN Series:
Table of Contents

Advertisement

Replacing an Imaging Unit

When replacing an imaging unit, refer to the following table. For optimum print
quality and performance, use only approved Epson imaging units, as listed in
the table below. You can find the imaging unit part numbers on the consum-
ables reorder label inside the front cover your machine.
Imaging Unit Type
Imaging Unit -Black (K)
Imaging Unit -Yellow (Y)
Imaging Unit -Magenta (M)
Imaging Unit -Cyan (C)
Note
Do not touch the OPC drum
surface. This could lower image
quality.
Exposure to light can damage the
drum, causing dark or light areas
to appear on the printed page and
reducing the service life of the
drum.
You are advised to replace the indicated imaging unit when the message
I-UNIT END/REPLACE X
1
Check the message window to see which color imaging unit needs replac-
ing.
188
Imaging Unit Parts Number
S051194
S051191
S051192
S051193
Y
appears.
Replacing Consumables

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser cx28 series

Table of Contents