Table of Contents
Advertisement
Editing/Deleting Group Destinations
Information registered with a group destination can be edited or deleted.
1
In the main screen (Scan mode), press the + or , key to select
ITY
, and then press the Select key.
2
Press the + or , key to select
the Select key.
3
Press the + or , key to select
4
Use the keypad to type in the number (between 1 and 20) for the group
destination to be edited/deleted, and then press the Select key.
The information currently registered for the group destination appears for
about two seconds.
5
Press the + or , key to select
delete the destination, and then press the Select key.
DELETE
If
REGISTER
6
If desired, edit the group name, and then press the Select key.
7
Press the + or , key to select
CHECK
then press the Select key.
FINISH
If
ADDRESS REGISTER
tinue with step 6 of "Registering Group Destinations" on page 174. If
CHECK/EDIT
8
Press the + or , key to select the address destination to be deleted, and
then press the Stop/Reset key.
9
Press the + or , key to select
10
After the address destination is deleted, press the Back key.
11
To delete another address destination, repeat the procedure from step 8.
Scanning With the Machine
was selected, the settings are deleted, and the
menu appears again.
For details on entering/editing text, refer to "Entering Text" on page
283.
EDIT
/
to delete the destination or
was selected, the edited settings are saved, and the
was selected, continue with step 8.
To check the settings for the selected address destination, press
the Select key.
ADDRESS REGISTER
GROUP
, and then press the Select key.
EDIT
to edit information or
ADD
to add an address destination,
FINISH
menu appears again. If
Yes
, and then press the Select key.
UTIL-
, and then press
DELETE
ADDRESS
to finish editing, and
ADD
was selected, con-
to
175
Advertisement
Table of Contents
