Table of Contents
Advertisement
This message...
REMOVE ORIGINAL
IN ADFR
RESULTS ARE OVER xxx
SCANNER MOTION ERROR
CHECK SCANNER LOCK
SCANNER UNIT OPEN
CLOSE SCANNER UNIT
SERVER MEMORY FULL
SMTP Server
THE PARTY IS FULL
260
means...
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
The LDAP search
results exceed the
maximum specified
MAX.
with
SEARCH RESULT
in the LDAP SET-
TING menu.
The scanner is
locked.
The scanner unit is
open.
The memory of the
SMTP server has
become full.
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
Status, Error, and Service Messages
Do this...
Place the document on
the original glass.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
Move the scanner lock
lever to
, and then
turn the machine off,
then on again. For
details, refer to
"Unlocking the Scan-
ner" on page 214.
Close the scanner unit.
Free up some space
on the disk, for exam-
ple, by contacting your
server administrator.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
Advertisement
Table of Contents
