Table of Contents
Advertisement
Selecting From the Address Book
The address destinations and group destinations registered on this machine
are saved in the address book. Follow the procedure described below to
specify an address (e-mail address, FTP address or SMB address) from the
address book as the recipient of the scan data.
This feature is available only if data has been registered in the
address book.
1
With the main screen or
AddressBook key four times so that
2
Press the + or , key to select
A list of the address book contents appears.
3
Press the + or , key to select the desired data, and then press the Select
key.
4
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
5
If an e-mail address was selected, press the + or , key to select
ISH
, and then press the Select key.
To add an additional e-mail address, select
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select
step 5. To delete an address, select
then continue with step 2 of "Deleting a Specified Destination
Address".
Searching the Address Book
The destination address (e-mail address, FTP address or SMB address)
where the scan data is to be sent can be specified by searching the address
book.
This feature is available only if data has been registered in the
address book.
1
With the main screen (Scan mode) or
played, press the AddressBook key four times so that
appears.
2
Press the + or , key to select
164
Can Use AddressBook
ADDRESS BOOK
LIST
, and then press the Select key.
Can Use AddressBook
SEARCH
, and then press the Select key.
Scanning With the Machine
displayed, press the
appears.
ADD
in step 5, and
CHECK/EDIT
CHECK/EDIT
in step 5, and
ADDRESS BOOK
FIN-
in
dis-
Advertisement
Table of Contents
