Copy Quality Problems - Epson AcuLaser CX17 Series User Manual

Copy Quality Problems

Problem
(Epson AcuLaser CX17NF/CX17WF
only)
There are lines or streaks in copies
made from the ADF.
There are spots in copies taken from the
document glass.
The reverse side of the original is
showing on the copy.
Light colors are washed out or white on
the copy.
Image is too light or dark.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Action
There is debris on the ADF glass. When scanning, the paper from the ADF passes
over the debris creating lines or streaks.
Clean the ADF glass with a lint free cloth.
See Also:
"Cleaning the Scanner" on page 355
There is debris on the document glass. When scanning, the debris creates a spot on
the image.
Clean the document glass with a lint free cloth.
See Also:
"Cleaning the Scanner" on page 355
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto Exposure" on
page 169.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see "Auto Exposure" on
page 169.
Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see "Lighten/Darken" on
page 167.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
330