Epson AcuLaser CX17 Series User Manual page 134

The Data LED blinks and the Insert Output to Tray message appears on the LCD panel when
the even pages finish printing.
2. After the even pages are printed, remove the paper stack from the center output tray.
Note:
Warped or curled prints can cause paper jams. Straighten them before setting them.
3. Stack the prints and set them as they are (with the blank side facing up) into the MPF, and then
press the button.
Pages are printed in the order of page 1 (rear of page 2), page 3 (rear of page 4), and then page 5
(rear of page 6).
Note:
Printing on both sides of the paper is not possible if the document consists of various sizes of paper.
Epson AcuLaser CX17 Series
Printing Basics
User's Guide
134