Manual Setup - Epson AcuLaser CX17 Series User Manual

Automatic Setup Using
*1
WPS-PIN is a method to authenticate and register devices required for wireless configuration, by entering PIN code in the
printer and computer. This setting, performed through access point, is available only when the access points of your
wireless router supports WPS.
*2
WPS-PBC is a method to authenticate and register devices required for wireless configuration, by pressing the button
provided on the access point via wireless routers, and then performing WPS-PBC setting on the operator panel. This
setting is available only when the access point supports WPS.

Manual Setup

You can manually configure wireless settings to connect your printer to an access point
(infrastructure) network or computer-to-computer (ad-hoc) network.
Connecting to Access Point Network
To configure the wireless settings through an access point such as a wireless router:
1. On the operator panel, press the System button.
2. Select Admin Menu, and then press the
3. Select Network, and then press the
4. Select Wireless Setup, and then press the
5. Select Manual Setup, and then press the
6. Enter the SSID, and then press the
Use the numeric keypad to enter the desired value, and press the
7. Select Infrastructure, and then press the
8. Select an encryption type, and then press the
Important:
Be sure to use one of the supported encryption methods to protect your network traffic.
9. Enter the WEP key or pass phrase, and then press the
Use the numeric keypad to enter the desired value, and press the
*1
WPS-PIN
*2
WPS-PBC
button.
button.
button.
button.
button.
button.
button.
Printer Connection and Software Installation
Epson AcuLaser CX17 Series
or button to move a cursor.
button.
or button to move a cursor.
User's Guide
104