WPS-PIN
Note:
❏ WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and
register devices required for wireless configuration, by entering PIN code to a printer and computer.
This setting, performed through access point, is available only when the access points of your wireless
router supports WPS.
❏ Before WPS-PIN starts, you will need to enter your PIN code at the web page of the wireless access
point. See the access point manual for the details.
1. Select WPS-PIN, and then click Next.
2. Follow the on-screen instructions until the "Check Setup" screen appears.
3. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
If you see any errors, click Trouble Shooting Guide and follow the instruction.
Epson AcuLaser CX17 Series
Printer Connection and Software Installation
User's Guide
76