Mottle; Ghosting - Epson AcuLaser CX17 Series User Manual

Problem
The printed result has vertical blanks.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Mottle

Problem
The printed result has mottled
appearance.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Ghosting

Action
Clean inside the printer and perform test print.
1. Clean inside the printer by using the print head cleaning rod.
2. Click Print Test Page in the Properties window of the print driver.
See Also:
"Cleaning Inside the Printer" on page 358
Action
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click the Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
322