Epson AcuLaser CX17 Series User Manual page 328

Problem
Color registration is out of alignment.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Action
Execute auto color registration adjustment.
1. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2. Deselect the check box next to On.
3. Click the Start button next to Auto Correct.
Clean the CTD sensor.
1. Clean the CTD sensor.
2. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
3. Deselect the check box next to On.
4. Click the Start button next to Auto Correct.
See Also:
"Cleaning the Color Toner Density (CTD) Sensor" on page 361
Print the color registration chart and manually correct the color registration.
1. Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2. Deselect the check box next to On.
3. Click the Start button next to Print Color Regi Chart.
The color registration chart is printed.
4. Check the values with the straight lines on the chart.
5. Select the value for each color on the Printer Setting Utility.
6. Click the Apply New Settings button.
7. Click the Start button next to Print Color Regi Chart to print the color
registration chart again.
8. Adjust till all straight lines are at the value of 0.
See Also:
"Adjusting Color Registration" on page 331
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
328