Engine (Ignition) Switch - Lexus RX350/270 Owner's Manual

RX350_270_EE_48D77E.book 180 ページ ２０１４年１月２４日 金曜日 午前１０時４分
2-1. Driving procedures

Engine (ignition) switch

Performing the following operations when carrying the electronic key on
your person starts the engine or changes "ENGINE START STOP" switch
modes.
■
Starting the engine
Check that the parking brake is set.
STEP 1
Check that the shift lever is set in P.
STEP 2
Firmly depress the brake pedal.
STEP 3
The "ENGINE START STOP" switch indicator will turn green. If the
indicator does not turn green, the engine cannot be started.
STEP 4
■ Stopping the engine
Stop the vehicle.
STEP 1
Shift the shift lever to P.
STEP 2
Set the parking brake. (→P. 194)
STEP 3
Press the "ENGINE START STOP" switch.
STEP 4
Release the brake pedal and check that the indicator on the
STEP 5
"ENGINE START STOP" switch is off.
180
RX350/270_EE
Press the "ENGINE START
STOP" switch.
The engine will crank until it
starts or for up to 30 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started from
any "ENGINE START STOP"
switch mode.