Table of Contents
Advertisement
RX350_270_EE_48D77E.book 350 ページ ２０１４年１月２４日 金曜日 午前１０時４分
3-2. Using the audio system
iPod functions
■
When an iPod is connected and the audio source is changed to iPod mode, the
●
iPod will resume play from the same point in which it was last used.
Depending on the iPod that is connected to the system, certain functions may
●
not be available. If a function is unavailable due to a malfunction (as opposed to
a system specification), disconnecting the device and reconnecting it once
again may resolve the problem.
While connected to the system, the iPod cannot be operated with its own con-
●
trols. It is necessary to use the controls of the vehicle's audio system instead.
When the battery level of an iPod is very low, the iPod may not operate. If so,
●
charge the iPod before use.
Supported models (→P. 351)
●
iPod problems
■
To resolve most problems encountered when using your iPod, disconnect your iPod
from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner' s Manual.
Display
■
→P. 334
Error messages
■
"ERROR":
"NO MUSIC": This indicates that there is no music data in the iPod.
"EMPTY":
"UPDATE":
350
RX350/270_EE
This indicates a problem in the iPod or its connection.
This indicates that some available songs are not found in a selected
playlist.
This indicates that the version of the iPod is not compatible.
Upgrade your iPod software to the latest version.
Advertisement
Table of Contents
