RX350_270_EE_48D77E.book 232 ページ 2014年1月24日 金曜日 午前10時4分
2-4. Using other driving systems
■
Canceling and resuming the constant speed control
Cruise control can be set when
■
The shift lever is in the D or range 4 or higher of S has been selected.
●
Range 4 or higher has been selected by using the paddle shift.
●
(vehicles with paddle shift switch)
Vehicle speed is above approximately 40 km/h (25 mph).
●
Accelerating after setting the vehicle speed
■
The vehicle can be accelerated normally. After acceleration, the set speed
●
resumes.
Even without canceling the cruise control, the set speed can be increased by
●
first accelerating the vehicle to the desired speed and then pushing the lever
down to set the new speed.
232
RX350/270_EE
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied.
Pushing the lever up resumes
the constant speed control.
Resuming is available when the
vehicle speed is more than
approximately 40 km/h (25
mph).