Table of Contents
Advertisement
RX350_270_EE_48D77E.book 359 ページ ２０１４年１月２４日 金曜日 午前１０時４分
MP3 and WMA playback
●
• When a device containing MP3 or WMA files is connected, all files in the
USB memory device are checked. Once the file check is finished, the first
MP3 or WMA file is played. To make the file check finish more quickly, we
recommend that you do not include any files other than MP3 or WMA files
or create any unnecessary folders.
• When the USB device is connected and the audio source is changed to USB
memory mode, the USB device will start playing the first file in the first folder.
If the same device is removed and reinserted (and the contents have not been
changed), the USB device will resume play from the same point in which it
was last used.
Extensions
●
If the file extensions .mp3 and .wma are used for files other than MP3 and WMA
files, they will be skipped (not played).
Playback
●
• To play MP3 files with steady sound quality, we recommend a fixed bit rate
of at least 128 kbps and a sampling frequency of 44.1 kHz.
• There is a wide variety of freeware and other encoding software for MP3
and WMA files on the market, and depending on the status of the encoding
and the file format, poor sound quality or noise at the start of playback may
result. In some cases, playback may not be possible at all.
• Microsoft, Windows, and Windows Media are registered trademarks of
Microsoft Corporation in the U.S.A. and other countries.
CAUTION
Caution while driving
■
Do not connect USB memories or operate the controls.
RX350/270_EE
3-2. Using the audio system
359
3
Advertisement
Table of Contents
