Table of Contents
Advertisement
RX350_270_EE_48D77E.book 145 ページ ２０１４年１月２４日 金曜日 午前１０時４分
Key of letters inserted in the above table:
U: Suitable for "universal" category child restraint system approved for
use in this mass group.
UF: Suitable for forward-facing "universal" category child restraint sys-
tem approved for use in this mass group.
L:
Suitable for child restraint system shows in child restraint system list.
X: Not suitable seat position for children in this mass group.
1
*
: Adjust the front seatback to the most upright position. Move the front seat to
the rearmost position.
If the head restraint interferes with your child restraint system, and the head
restraint can be removed, remove the head restraint.
If the passenger seat is equipped with a vertical height adjuster, it must be
placed in the uppermost position.
Follow these procedures:
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby seat
into the support base, adjust the seatback rearward until there is no inter-
ference.
• For installing a forward-facing child seat
If there is gap between the child seat and the seatback, tilt the seatback
rearward until good contact is achieved.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move
the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright position, adjust
the seatback to the most comfortable position.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move
the seat cushion forward.
2
*
: If the head restraint interferes with your child restraint system, and the head
restraint can be removed, remove the head restraint.
The child restraint system mentioned in the table may not be available
outside of the EU area.
RX350/270_EE
1-7. Safety information
1
145
Advertisement
Table of Contents
