RX350_270_EE_48D77E.book 259 ページ 2014年1月24日 金曜日 午前10時4分
Operating conditions
■
After stopping the engine, the vehicle will remain lowered for a maximum of 60
seconds.
Height selector switch (driver's side instrument panel)
●
• While the engine is running, any vehicle height mode can be selected.
• Luggage mode can only be selected when the shift lever is in P position.
Height selector switch (luggage compartment)
●
• When the engine is running and the shift lever is in the P position, any vehicle
height other than "LO" mode can be selected.
• When the "ENGINE START STOP" switch is turned off, the vehicle height
can only be lowered (only the "∨" side of the switch can be operated).
This switch can only be operated when the back door is open.
Height control off switch
●
When the vehicle is stopped with the "ENGINE START STOP" switch in IGNI-
TION ON mode, vehicle height control can be disabled/re-enabled.
When changing vehicle height modes
■
Before operating the height selector switch to raise/lower the vehicle height,
ensure that there are no objects in the surrounding area that could damage the
vehicle.
When "N" mode is selected
■
During high speed driving, the vehicle height will automatically change to that of
"LO" mode.
When "HI" mode is selected
■
The vehicle height will change to that of "N" mode when vehicle speed reaches 50
km/h (31 mph) or when vehicle speed has exceeded 30 km/h (19 mph) for approx-
imately 10 seconds. Even if vehicle speed is reduced below 30 km/h (19 mph), the
vehicle height will not automatically return to "HI" mode.
When "LO" mode is selected
■
The vehicle height will change to that of "N" mode when the engine is restarted.
RX350/270_EE
2-4. Using other driving systems
259
2