[Parsed text]:
Prefixes and suffixes are appended directly as text. Reserved variables can be
included and are converted to data during printing.
[Position]
You can control the position that the command font is inserted into the print data.
[Before page]: The command is inserted before the page starts.
[Before elements]:
The command is inserted after the page starts and in front of all objects.
[Element position]: The command is inserted at the position of the object.
[After elements]:
The command is inserted after all the objects and before the page ends.
[After page]: The command is inserted after the page ends.
[Merge contents]
This setting is used to apply commands only the appropriate number of times to
objects divided multiple times in lines or on the page.
[No merge]: Any special processing is not performed.
[All text on the same line]:
Apply to text that have the same Y coordinates only once using the same font.
This setting is applied even if one line of text is divided into multiple characters.
[All text on the page]:
Apply to all text on the same label only once using the same font. This setting is
used to apply text to serial data like initialization and end processing.
72