Table of Contents
Advertisement
Voice Services Software Installation Guide
Click on
5.
A progress window opens showing files as they are copied onto the system.
When the software is installed, a successfully installed dialog box opens.
Click on
6.
If the Control Center is the only Voice Services component selected for
installation, another successfully installed dialog box opens indicating all
services have been installed. If you selected other Voice Services components
to be installed at the same time, the installation program continues with the
next component from the list.
Note: The installation program may display a message that prompts you to
restart the computer system. If you are installing other Voice Services, wait
until you finish installing all components before restarting the computer.
Starting the Control Center
To start the Control Center:
From Windows, choose
1.
Choose
2.
Choose
3.
Choose
4.
If the Control Center was installed correctly, it starts and then displays
Initialization and Login windows. For information about starting, initializing, and
using the Control Center application, refer to the Control Center Administration
Guide.
If the Control Center did not install correctly, it displays errors at startup. These
could be caused by corrupted or missing files such as RSA™ security (key ring)
or dynamic link library (.dll) files required by the Control Center for starting and
operating. If you have any difficulty, contact
assistance.
3-4
to start copying program files.
Next
.
Continue
Start
.
Programs
.
NetSpeak
NetSpeak Control Center
.
.
Bay Networks Customer Service
for
303143-A Rev. 00
Advertisement
Table of Contents
