Table of Contents
Advertisement
3.
Push the START button.
5.3.3 Park
Operating mode
Park / Schedule means that the product
goes back to the charging station where it stays until the
next schedule. If the product has operated the maximum
cutting time for the day, it will start to operate again the
Make an estimate of the necessary
next day. Refer to
operating time on page 21 .
5.3.3.1 To park the product and start again with the next
schedule
This can be set in the dashboard in the app or with the
keypad on the product:
1.
Push the STOP button.
2.
Push the Park button.
3.
Push the START button.
Note:
To change the operating mode of the product,
push the STOP button and the product will be in idle
mode where you can set an operating mode.
5.3.4 Park until further notice
Use the operating mode
product to go back to the charging station. The product
will stay in the charging station until you select a new
operating mode.
5.3.4.1 To park the product
This can be set in the dashboard in the app or with the
keypad on the product:
1886 - 001 - 01.02.2023
1
2
3
4
1
2
3
4
Park until further notice for the
1.
Push the STOP button.
2.
Push the Park button for 2 seconds.
3.
Push the START button.
Note:
To change the operating mode of the product,
push the STOP button and the product will be in idle
mode where you can set an operating mode.
5.3.5 Override schedule
Override schedule to temporarily override the
Select
schedule settings. You can select to override the
schedule settings for 3 hours. The product cannot be
set to cut more than the maximum cutting time for each
day.
5.3.5.1 To override the schedule
This can be set in the dashboard in the app or with the
keypad on the product:
1.
Push the STOP button.
2.
Push the Play button for 2 seconds.
3.
Push the START button.
5.4 To stop the product
1.
Push the STOP button on top of the product.
1
2
3
4
1
2
3
4
Operation - 25
Advertisement
Table of Contents
