Table of Contents
Advertisement
Note:
Avoid house collisions is selected it can result
If
in grass that is not cut around the charging station.
4.4.2 FlexiFence
If you install the FlexiFence accessory, you must enable
the FlexiFence function in the Automower
app.
4.5 General
General menu you can set the time and date, or
In the
reset to factory settings.
This menu is only available when your mobile device is
connected to the product with Bluetooth
4.5.1 Time & date
The time and date can be changed manually, or by
using the time and date from the mobile device.
4.5.2 Reset to factory settings
The user settings can be reset to factory settings.
Note:
PIN code, Loop signal, Messages and Date &
Time will not be reset.
4.6 Safety
Safety menu you can set the safety settings of the
In the
product.
4.6.1 New loop signal
The loop signal is randomly selected to create a unique
link between the product and the charging station. In
rare cases, there may be a need to generate a new
signal, for instance if two adjacent installations have
a very similar signal. Put the product in the charging
station before you make a new loop signal.
4.6.2 PIN code
When you use the product for the first time you must
enter the factory PIN code 1234. You can change the
PIN code in the Automower
code must have 4 digits. You can use the numbers 1-4
to set a new PIN code.
1886 - 001 - 01.02.2023
®
Connect
®
.
®
Connect app. The PIN
®
4.7 Automower
®
Automower
Connect you can enable or disable the
In
®
Automower
Connect function. You can connect the
product to a Wi-Fi network. You can also see the signal
strength and connectivity status.
This menu is only available when your mobile device is
connected to the product with Bluetooth
4.8 Download firmware over the air
(Firmware over the air FOTA)
The product has a function that automatically downloads
new firmware. The product downloads new firmware
when it is parked in the charging station and has
Wi-Fi coverage. When a new firmware is available, a
notification shows in the app where you can select to
install the new firmware.
Connect
®
.
Settings - 23
Advertisement
Table of Contents
