Bay Networks CLAM Release Note page 25

119781-B Rev. 01
12. On page 2 of the Nautica CLAM installation manual, there
are only two (2) velcro feet supplied with the Nautica
CLAM.
13. On page 2 of the Nautica CLAM Installation Manual, the
gray manager cable is RJ-45 to RJ-45 with a DB9 adaptor.
14. On page 3 of the Nautica CLAM Installation Manual, the
V.11, V.24 and V.35 cables for the CLAM WAN and the
CLAM WAN/ISDN are not supplied with the unti. These are
orderable options.
15. A problem has been found with the CONV-BCC utility that
incorrectly creates ISDN number entries with the double
quotes in the wrong place. Users upgrading from 3.532R to
4.123R who attempt to use the CONV-BCC.exe utility to
convert the previously saved 3.532R DCONFIG text need to
edit the output from the CONV-BCC utility if ISDN numbers
are to be converted. Automatic Nautica Wizard conversions
from 4.114R to 4.123R are not affected.
Any ISDN number entries that are created like this:
isdn-number 1/"222112"
Need to be edited to look as follows:
isdn-number "1/222112"
Alternatively, the double quotes can be deleted:
isdn-number 1/222112
The file should be edited with a normal file editor such as
Notepad or Wordpad and saved before restoring the
configuration to the upgraded router.
Known Anomalies
4-3