119781-B Rev. 01
Figure 3-3.
Click on Finish and let the router make the initial call
(this may fail - don't worry).
Next, click on the router in the Nautica Wizard window
and then click on Advanced > Paths.
Note:
The options in the Advanced menu are not available
unless the unit to be configured is selected in the Nautica
Wizard window.
In the Paths Table, select the path called RemotePPP (it
may have another name if your ISP CHAP challenged
the router on the initial call), DO NOT SELECT
LAN01.
Select the Edit button and, in the PPP Main Path
parameters tab, click on the NAT enable parameter and
also the Auto Learn IP Address parameter.
Router Destinations Window
Guidance Notes
3-3