Bay Networks CLAM Release Note page 20

Release Notes for Nautica Marlin & Clam
box# system
system# blacklist-timeout 20
[Save] system# save
system#
box# mod dev wan/wan01
device/wan/wan01# mode frame
[Save] device/wan/wan01# speed 128000
3-6
Figure 3-5.
If you are using BCC, enter the following at a configuration
prompt:
6. Frame Relay is not configurable from Nautica Wizard. To
configure frame relay you must use BCC. When you are in
BCC it is best to use the automatic Permanent Virtual Circuit
(PVC) feature.
Firstly change your WAN device as follows:
Edit System Settings Window
119781-B Rev. 01