Table of Contents
Advertisement
Page 76 of 160
Meridian 1 Attendant PC call processing
Recall from an extension using LINK or ATT RECALL
P0891256 Standard 2.00 February 1999
An extension user, while talking to someone on the phone, may
recall you by clicking ATT RECALL, or by clicking LINK once and
dialing your number, depending on the type of extension. The
recall ICI goes on.
1
You receive a recall. Click the Loop key beside the quickly
flashing Destination indicator. The tone stops and the
Loop and Destination indicators go on steadily; you, the
party originating the call, and the original caller are
connected. The recall ICI and Source indicators go on.
Click the Rls Dst button. (if the recaller has not already
2
released). The Destination indicator goes off; the recaller
is disconnected.
3
If the caller wishes to be transferred, dial the new
extension. The Excl Src indicator goes on during dialing.
The Destination indicator flashes slowly.
4
Click the Release button to end your connection in the
call. The Release indicator goes on; you are free to
process other calls.
Note 1: This recall procedure describes a call that was originally
extended through your console (Source and Destination indicators
both active).
Note 2: If you wish to activate the Secrecy feature, which
excludes the caller until connected to the called party, click Excl
Src before extending the call.
Advertisement
Table of Contents
